Zero water. Ambient air is the only means of cooling.
MDC-F Table-Type Dry Cooler
For small and medium-sized plantsNo use of water, extreme simplicity of operation: these are the advantages of dry coolers in general and, in particular, of the MDC series with table coil configuration. MDC-F is an excellent solution for medium to high outlet fluid temperatures.
Simple operation and maintenance. Design and operation avoid any complexity.
Low acquisition costs. Excellent solution for a low initial investment.
Scalability. Possibility of adding subsequent systems in a modular view.
Industry 4.0. Ability to control, monitor and collect data on company management system.
MDC-F Table-type Dry cooler: operation
Dry coolers, or air coolers (or even dry cooling systems) are simple and reliable equipment.
The operating principle of MDC-F table-type dry cooler, and of all dry coolers in general, is based on a sensible heat exchange between air and water: air is drawn in by fans through a finned coil, while water (or a mixture of water and glycol) flows through the tubes that make up the coil. The fluid then cools as cooler ambient air laps the surface of the coil.
Fins are used to increase the overall heat exchange surface area so that the equipment can be as compact and efficient as possible. The water circuit is closed and never in contact with external elements.
In particular, the MDC-F series is an excellent cooling solution for small systems. A plus is also the low acquisition cost.
The only resource use envisaged is that of electricity to operate the fans, AC or EC type: their control is provided by a controller or frequency converter that modulates the fan revolutions according to the actual operating conditions. Their performance and return temperature are a consequence of the place of installation.
The approach temperature is usually about 5°C.
Ask for Information
Dry Cooler: complete guide
Read the article and learn moreTechnical features of this table-type dry cooler
- Versions: Single or Double row of fans.
- Frame made of press-folded galvanized sheet metal (1.5 mm thick) suitable for adequately supporting the weight of heat exchange coils.
- Coil type: Cu/Al.
- Motor type: AC or EC.
- Control panel (for EC motors).
- Number of fans: 1 to 16.
- Thermal capacity: 20 kW to 2,000 kW.
Some MITA projects
Cooler Replacement for a Manufacturer of Porcelain Products in the Netherlands
Significant water savings and a wide range of available solutions-these two factors were key for a Dutch manufacturing company replacing its cooling systems. Two adiabatic dry coolers from MITA Cooling Technologies.
Learn More
Cooling Efficiency for a Food Company in Poland
MITA Cooling Technologies scores, together with the agency EETS, a new achievement for the food industry: a poultry products company chose the PAD-V adiabatic cooler for a section of its production processes.
Learn More
Extraordinary water savings for the plastics industry with the MITA adiabatic system
A plastics processing company in the province of Lecco has chosen the PAD-V cooler for the cooling circuit of its production plant: the eco-sustainable system that cuts water and energy bills.
Learn MoreTools to help you choose
Cooling Advisors
Preliminary plant evaluation
Tailor-made design
Newsletter
Subscribe to MITA newsletter and stay updated on technical solutions for industrial and civil cooling and get to know our offer.